Emission Control Technology
Spray Dryer Absorber (SDA)
Spray Dryer Absorbers facilitate the removal of acidic pollutants, heavy metals, and dust from flue- and off-gases at fossil-fuelled power plants, waste incinerators and industrial installations.
The Spray Drying Absorption process – a semi-dry flue gas desulphurization and cleaning process – facilitates a reaction efficiently transforming gaseous pollutants such as e.g. SO2, SO3, HCl, Hg, and dioxins into a slaked lime Ca(OH)2 absorbent to form a stable and dry powdery product that is easy to store and transport.
Every Spray Drying Absorption process is tailored to meet the client’s requirements as well as applicable environmental legislation. The absorbers boast well-proven system features such as e.g. peak-control and activated-carbon injection which have been designed for the purposes of ensuring low mercury and dioxin emission.
Benefits
- High acid-gas removal efficiencies
- Low capital, operating and maintenance costs
- Low power and water consumption – operates on low-quality water
- High plant availability
Spray Drying Absorption process
The essential process stages are:
- Absorbent preparation and dosing
- Removal of Sox (acid gases)
- Solids recirculation and product discharge
Hot, untreated flue gas is introduced into the Spray Dryer Absorber via a flue gas disperser and subsequently comes into contact with a highly reactive absorbent that will be atomized by a Rotary Atomizer.
An efficient contact between flue gas and absorbent allows for rapid mass transfer of acidic components from the flue gas into the alkaline absorbent. The absorbent neutralizes the absorbed acid (SO2 + Ca(OH)2 -> CaSO3/CaSO4 + H2O). While this reaction takes place, the water is evaporated, thus forming a dry powder. A fraction of the dry powder will be deposited at the bottom of the absorber chamber and discharged from here, whereas the main part is carried to the downstream dust collector while the cooled flue gas leaves the chamber. The flue gas – now clean – passes from the dust collector to the stack without re-heating.
Key Components
The Spray Dryer Absorber – the Rotary Atomizer, the Gas Disperser and the Absorber Chamber – is the heart of the Spray Drying Absorption process.
Spray Drying Absorption - the unique use of the spray drying technology for acid-gas absorption - was originally invented by GEA in the 1970s.
Ever since, it has been subject to continuous further development and optimized to meet changing conditions and requirements. Hence, the process stands as an efficient, versatile and thoroughly tested technology.
Rotary Atomizer wheel
This wheel is the key element in the SDA and atomizes the absorbent liquid into flue gas. The fast-rotating wheel breaks the liquid into an atomized mist of exceptionally small droplets with immense surface areas.
Gas Dispersers
Gas dispersers serve to optimize the distribution of flue gas inside the absorber chamber, facilitating the best contact between the flue gas and the atomized droplets of absorbent feed.
Spray Dryer Absorber chamber
The flue gas enters the SDA chamber, a cylindrical steel construction, via the gas disperser and leaves through an outlet duct at the coned bottom. The Rotary Atomizer installed centrally allows the gas to mix with the feed.
Applications and references
GEA Niro®
|
F-1000 |
F-800 |
F-360 |
F-350 |
F-100 |
F-100 / D |
|
Waste-to-Energy |
|
|
|
|
• |
• |
|
Power plants |
• |
• |
• |
• |
|
|
|
Small boilers |
|
|
|
|
• |
• |
|
Sinter plants |
• |
• |
• |
• |
|
|
|
Smelter plants |
|
|
• |
• |
|
|
|
Pelletizers |
|
|
• |
• |
|
|
|
Coking plants |
|
|
|
|
• |
• |
Worldwide, more than 500 Spray Drying Absorption plants are installed at power stations, steel plants, waste incinerator plants, and at plants burning hazardous waste. They all share one common trait: They are operated in accordance with or above required performance stipulations as laid down by local authorities. Even today, the very first plants, installed in the 1980’s, are still operating satisfactorily and successfully.
Industries that profit from a SDA system
Explore how GEA’s SDA systems can be tailor-designed to meet the rigorous demand of diverse industrial environments, offering robust performance, flexibility and comprehensive support to ensure energy efficiency, optimal operation and compliance with environmental standards.
Power plant applications
The end product from Spray Drying Absorption consists of the reaction products, excess absorbent and fly ash. The SO2/HCl ratio of the inlet gas is high, thus allowing for operation close to the adiabatic saturation temperature and minimizing the content of lime in the end product. A Spray Drying Absorption system can achieve very high desulphurization rates, practically only limited by the accepted content of excess lime in the end product.
Waste to Energy applications
Waste incinerator applications are generally characterized by relatively low gas amounts; and, hence, the absorber is constructed with only a roof gas disperser. The smaller plant size and the composition of acid content typically favor single-pass designs. The Rotary Atomizers employed in waste incinerator plants, SDAs, are normally type F-100, equipped with wheels in Hastelloy.
The high HCl content in the gas gives rise to a considerably higher inlet gas temperature than seen in power plant applications. Consequently, the end products will show different behaviors. Further, the moisture and O2 content of the waste gas is higher. The drying properties of the absorber, high chloride content in the end product, single pass mode, etc., call for a design with higher retention time in the absorber chamber, and therefore the plants are operated at high outlet temperatures.
Sinter plant applications
Spray Drying Absorption installations for sinter plants combine features from power- and waste incineration plants.
Flue gas volumes are normally high; and, hence, necessitate the installation of large absorber modules. But, frequently, acid contents will be relatively low, thus allowing for the use of single pass systems.
Variations in gas quality may occur relatively fast, and therefore the control system must be designed to act accordingly. To a large extent, absorbent used for sinter plant applications will be purchased and stored as CaO for subsequent on-site slaking. The Rotary Atomizers applied in sinter plants are generally F-360, F-800 and F-1000, equipped with stainless steel wheels and central parts.
Downloads
Related Products
Removal of SOx by dry scrubbing
The dry sorption process removes acid gases like sulfur oxides (SOx) and hydrogen chloride (HCl) through two basic steps. The first step is injection of a dry sorbent into the entrained flow reactor. The second one removes the formed compounds through a downstream particulate matter control device such as a baghouse filter, electrostatic precipit...
Removal of SOx by wet scrubbing
For the wet desulphurization of flue gas, a scrubbing liquid is recirculating and injected to the exhaust where SOx is absorbed in the liquid and reacts. Simultaneously, the flue gas is saturated with water vapor. The reagent is fed to the sump of the scrubber unit and intermittent dewatering is used to drain the reaction agent.
GEA Insights India
All pharmaceutical freeze-drying vials are the same! Aren't they?
Whether it’s a fad or the future, 100% vial traceability is becoming an increasingly important consideration in the pharmaceutical freeze drying industry. Keeping a close eye on developments is GEA. We’re investigating possible solutions and, what’s more, we have the experience, expertise and know-how to implement them.
Alcohol-free beer: They want it all – they want less
There was a time when the phrases ‘non-alcoholic beer’ and ‘tastes good’ were seldom used together in the same sentence, particularly by consumers. But low-proof and alcohol-free beers have come a long way – many of them now refreshing drinks in their own right – thanks in no small part to technology from GEA.
Innovating patient care with aseptic spray drying
At GEA, our commitment to engineering for a better world fuels our pursuit of innovative solutions that enhance patient care and safety. One of our most promising ventures in recent years is aseptic spray drying – a technology that promises to revolutionize pharmaceutical manufacturing.
