Filling Lines – Filling modules
Aseptic filling modules
GEA offers a range of volumetric electronic filling modules that meet stringent sterile environment requirements. A wide variety of drinks can be filled, including high and low acid, still and carbonated beverages, with and without pulps, fibers or pieces.
GEA offers a range of aseptic fillers for any sensitive product
The filling of sensitive beverages demands high levels of hygiene and safety. GEA aseptic filling modules manage any possible risk to the product by paying special attention to environmental control and optimizing performance in terms of speed, accuracy and flexibility. Both PET and HDPE bottles can be filled with all GEA fillers.
The filling modules are enclosed in a microbiological isolator in which the environment is cleaned and sterilized prior to production. The sterility is maintained during production with overpressure sterile air that’s supplied by an air management system equipped with double HEPA filters.
The GEA range of aseptic filling modules includes:
- Fillstar FX
- Fillstar CX
- Fillstar PX piston doser
- Magnetic filling valves
They can all be paired with GEA PAA-based or H2O2-based aseptic sterilization systems.
Benefits:
- Automatic dummy bottle insertion and extraction for closed-loop clean-in-place (CIP) and sterilize-in-place (SIP) procedures
- Redundant HEPA filters supply sterile air to the microbiological isolator to offer the same protection level required by FDA regulations
- On-board tank design reduces product loss during changeover
- Bottle format changeover can be done without losing sterility
Fillstar FX
The Fillstar FX range of aseptic volumetric electronic filling modules, supplied with magnetic flow meters, is suitable for a wide range of still products.
Detail of the Fillstar FX aseptic module
Aseptic filling of still products
Product is gravity fed to the filling valves from a sterile buffer tank located on top of the filling carousel. Each filling valve is equipped with a magnetic flow meter that regulates the quantity of liquid according to the container size. A dual-speed design (slow speed mode is used at the beginning and end of the filling cycle) enables foam-sensitive products to be filled without unwanted turbulence.
The product filling circuits are steam sterilized; the system — with no contact between the nozzle and the bottle during filling — allows for safe and reliable aseptic production.
FX range of electronic filling valves
Fillstar CX
The Fillstar CX aseptic volumetric electronic filling module can fill both still and carbonated drinks in aseptic conditions, including clear products and those containing pulps and fibers.The Fillstar CX is optimized to aseptically fill carbonated liquids (with contact between the bottle and filling nozzle), as well as the aseptic filling of still liquids (with no nozzle-to-bottle contact).
Rapid changeovers
The Fillstar CX has the ability to switch from a “no-contact” filling process to a “contact” one — and vice versa — without the need to shut down the system for mechanical adjustment. Changeover times that typically take more than 3 hours are effectively eliminated.
The filling parameters related to the specific product are predetermined and can be recalled using the machine’s control system without interrupting the sterile bottling process.
Fillstar PX
The aseptic filling of beverages with large particles is performed by a system comprising two different modules: the aseptic piston doser Fillstar PX can be combined with the Fillstar FX or the Fillstar CX for the flexible production of still and carbonated beverages containing large particles.
The Fillstar PX aseptic piston doser is part of the Aseptic Dual Filling System, suitable for sensitive beverages containing large pieces of fruit or cereals
Aseptic cold dosing for fruit and cereals
Most drinks on the market that contain solid particles are filled into bottles or cans using a hot fill technique or are sterilized, after filling, in an autoclave. However, this presents a number of problems: the heat treatment — which requires to be adequate to reach the core of the solid pieces — can affect the taste and the nutritional properties of the drink. As such, containers must be sufficiently robust to withstand the temperatures and pressures involved in the process without distortion. In addition, the whole process is extremely energy inefficient.
The aseptic Dual Filling System developed by GEA can be used to fill lightweight plastic bottles, in a cold-fill environment, with minimal energy consumption and the required level of dosing accuracy.
The aseptic Dual Filling System has two separate filling modules, both located inside the same microbiological isolator; the first doses the solid particles and the second completes the aseptic filling process by adding the clear liquid product.
The aseptic piston doser Fillstar PX is coupled with the Fillstar FX or Fillstar CX filling module that complete the process by adding the clear liquid product.
The Dual Filling System requires a two-stream process line: one dedicated to the thermal treatment of the pieces and one for the clear liquid that preserves their organoleptic and nutritional properties.
Thanks to an extensive experience with this type of application, GEA can offer an effective solution by combining the aseptic piston doser Fillstar PX with GEA thermal treatment technologies to optimize both solid particle dosing accuracy and integrity.
Benefits:
- The aseptic Piston Doser Fillstar PX handles the whole bottling process, eliminating the need for downstream heat treatment or beverage overheating.
- Energy costs are dramatically reduced.
- Extreme flexibility when preparing products containing fruit, hard or soft particles, pulps and fibers.
Magnetic filling valves
The GEA aseptic filling valve portfolio now benefits from the newly designed solution fit for filling a large variety of still sensitive beverages, including pulps and particles. It features magnetic actuators thus bringing flexibility and accuracy to a higher level and enhances versatility when filling high level carbonated sensitive beverages.
Benefits
- Reduced maintenance solution with no dynamic sealing (such as bellows or membranes) to separate the aseptic zone from the external environment
- High reliability valve sealing solution without additional gaskets and no off-flavor retention
- Easy and fast change over with simple replacement of the terminal nozzle allows to switch between high level carbonated products to still products clear or including fibers
Downloads
Related Products
Aseptic Filling Bloc Whitebloc
Specifically designed for the dairy industry, Whitebloc is the ideal solution for the aseptic bottling of products in HDPE and PET containers. Whitebloc uses an hydrogen peroxide (H2O2)-based sterilization technology to preserve the shelf-life of milk-based drinks and sensitive beverages.
Aseptic Filling Bloc Modulbloc
FDA-validated Modulbloc technology is a smart solution for low/medium-speed filling lines. It’s suitable for both HA and LA beverages, can reach production speeds of up to 18,000 bottles per hour on 500 ml bottles and allows a line availability of 165 hours without the need for intermediate SOP cycles during production.
GEA Decontamination Blow Fill System DBF
Ensuring food safety at the best in class TCO, the GEA DBF system make the advantages of preform decontamination and blow-fill integrated technology available to a wider range of sensitive beverages, with options for shelf stable to ESL based on the distribution chain.
Aseptic Blow Fill System ABF
Suitable for both high and low acid operations, the ABF 2.0 combines an aseptic blow molding machine with aseptic filler and capper modules, and features a hydrogen peroxide-based sterilization technology for preforms leaving the oven and caps.
GEA Insights India
All pharmaceutical freeze-drying vials are the same! Aren't they?
Whether it’s a fad or the future, 100% vial traceability is becoming an increasingly important consideration in the pharmaceutical freeze drying industry. Keeping a close eye on developments is GEA. We’re investigating possible solutions and, what’s more, we have the experience, expertise and know-how to implement them.
Alcohol-free beer: They want it all – they want less
There was a time when the phrases ‘non-alcoholic beer’ and ‘tastes good’ were seldom used together in the same sentence, particularly by consumers. But low-proof and alcohol-free beers have come a long way – many of them now refreshing drinks in their own right – thanks in no small part to technology from GEA.
Innovating patient care with aseptic spray drying
At GEA, our commitment to engineering for a better world fuels our pursuit of innovative solutions that enhance patient care and safety. One of our most promising ventures in recent years is aseptic spray drying – a technology that promises to revolutionize pharmaceutical manufacturing.
