Calculate your extra profit!
GEA standomat standardization unit for cream fat or milk fat
The GEA standomat MC plus is equipped with extreme precision controls to allow you to get more cream out of your milk standardization process.
Control system
With all models the cream fat content is determined via density measurement in a mass flow meter. The cream fat control is effected by variation of the cream flow. Control procedures adapted to the different operating conditions (start up, production, bowl discharge, shut down) take into account the specific requirements of the separator.
How does it work?
For standardizing, a part of the cream flow is controlled via a mass-flow meter and dosed back into the skim milk. The control components for the skim milk backpressure are integrated on the GEA standomat base unit. For all milk applications the feed flow to the separator is fully controlled and monitored.
What is standardizing?
If milk with a defined fat content is to be produced instead of skim milk a certain part of the cream has to be dosed back into the skim milk. This procedure is called standardizing. Besides the control of the cream or milk fat content, the units can also provide a proportional dosing of additives. Skimming separators split the incoming whole milk into skim milk and cream.
GEA standomat standardization unit for milk and whey
Calculate your extra profit! Check what our GEA standomat MC plus technology can do for your production profitability on an annual basis.
Actual milk fat prices:
www.globaldairytrade.info/en/product-results/anhydrous-milk-fat/
www.milchwirtschaft.de/markt-und-statistik/notierung/
*Calculations and prices are provided for information only and do not impose any guarantee
Our portfolio
Our portfolioDepending on the application and the control task our customers can choose amongst different standomat models:
- standomat WC
fat control for whey cream - standomat C
fat control for cream - standomat MC fat control for cream + fat control for milk
- standomat MC plus fat control for cream + fat control for milk
- standomat MCL
fat control for cream + low fat cream < 28 % + fat control for milk - standomat MCA
fat control for cream + fat control for milk + additive dosing - standomat MCLA
fat content regulation cream (also < 28 %) + fat content regulation milk + additive dosing - standomat CMC
fat content regulation cream + fat content regulation milk
The above-named versions describe only some of the possibilities available. For individual applications, GEA offers solutions customized to the needs of the customer.
GEA standomat WC
This model is specially designed for the control of whey cream. The cross sections are adapted to the very small cream flow in whey skimming. A partial recirculation of the cream to the feed flow reduces the response time and enables a quick reaction on varying feed flow rates and fluctuating raw whey fat contents.
GEA standomat C
Provides a precise control of the cream fat content at varying feed flow rates. The production is limited to cream and skim milk.
GEA standomat MC
Designed for cream fat control and standardization. It produces cream, skim milk, standardized milk and whole milk.
GEA standomat MC plus
Developped for cream fat control and standardization. It produces cream, skim milk, standardized milk and whole milk at an outstanding level of accuracy. In combination with the latest generation of GEA IO, which ensures a safe and reliable operation to maximize the centrifuge's performance and availability, an improved calibration makes the process of standardization much more precise and tolerance insensitive.
GEA standomat MCL
In addition to the features of the GEA standomat MC this model allows the production of low fat cream < 28 %, e. g. 10 % coffee cream. This unit enables the production of cream, low fat cream, skim milk, standardized milk and whole milk.
GEA standomat MCA
In addition to the GEA standomat MC the dosing of one additional liquid component like cream, protein concentrate, lactose concentrate or vitamin solution is included. This allows the production of cream, enriched skim milk, enriched standardized milk and enriched whole milk.
GEA standomat MCLA
This version is based on the MCL model. Additionally, dosing in the corresponding ratio and complete admixing of additional components can be realized.
GEA standomat CMC
In the cold milk process, this model additionally regulates the fat content of the milk (standardization). By this means, cream, skim milk, standardized milk and whole milk can be produced.
Technical Data GEA standomat
| WC | C | MC | MC plus | MCL | MCA | MCLA | CMC | |
| Capacity min. | 5,000 l/h | 5,000 l/h | 5,000 l/h | 5,000 l/h | 5,000 l/h | 5,000 l/h | 5,000 l/h | 20,000 l/h |
| max. | 60,000 l/h | 70,000 l/h | 70,000 l/h | 70,000 l/h | 70,000 l/h | 70,000 l/h | 70,000 l/h | 50,000 l/h |
| Dimensions in mm (L x W x H) | (on-site assembly) | (on-site assembly) | ca. 1500 x 1100 x 2050 | ca. 1500 x 1100 x 2050 | ca. 1500 x 1100 x 2050 | ca. 1500 x 1100 x 2050 | ca. 1500 x 1100 x 2050 | ca. 1500 x 1100 x 2050 |
| Cream fat content | • | • | • | • | • | • | • | • |
| Cream fat < 28% | – | - | - | - | •
| - | •
| - |
| Whole milk | – | - | •
| •
| •
| •
| •
| •
|
| Milk standardization | – | - | •
| • | • | • | • | • |
| Standardization
Fat in dry matter | – | - | - | - | - | - | - | - |
| Additive dosing | – | - | - | - | - | - | •
| •
|
| Fat Cream min. | 15% | 25% | 25% | 25% | 10% | 25% | 10% | 25% |
| max. | 30% | 45% | 45% | 45% | 45% | 45% | 45% | 45% |
| Fat Stand. min. | - | - | 0.5% | 0.5% | 0.5% | 0.5% | 0.5% | 0.5% |
| max. | Whole milk -0.2% | Whole milk -0.2% | Whole milk -0.2% | Whole milk -0.2% | Whole milk -0.2% | Whole milk -0.2% | ||
| Additive min. | - | - | - | - | - | 0.5%* | 0.5%* | - |
| max. | 5.0%* | 5.0%* | ||||||
| *of feed flow / • standard included | ||||||||
Standardization process
Milk standardization process
Procedure with warm milk
A high performance of the control system requires a stationary operation of the system at steady process conditions. The system is calibrated according to laboratory tests, which can be done by different analytical methods. Thus, any verification has to be carried out using the same methods. The accuracy of these different methods has to be taken into consideration while interpreting results.
The maximum fat content for standardizing is 0.2 % below the incoming whole milk fat content. The deviation from the setpoint for cream fat control is +/- 0.2 %. For milk standardizing, this deviation is on-line 0.05 % right after the control unit and 0.025 % after a buffer tank.
Procedure with cold milk
Cold milk standardization in particular makes possible a fat content in the milk of 0.5 – 4.2 %, whereby the raw milk content should be at least 0.2 % above the standardized milk fat content. The standard deviation is around +/- 0.04 %. The cream can be standardized up to maximum 40 % fat content. The control deviation here is +/- 0.4 %.
Partial homogenizing
The models MC, MCL and MCA can be prepared for partial homogenizing of the standardized or whole milk. With this a good homogenizing effect can be achieved with a homogenizer of 1/3 of the total capacity.
Cleaning
The automatic cleaning of theGEA standomatis effected by the CIP of the separator. Optionally the connecting valves for a separate CIP of the surplus cream line can be integrated into the unit. The additive dosing line of thestandomatMCA is cleaned in a separate cycle in any case.
Compact unit
The models WC and C do not require a rack, the individual components have to be mounted on site into the separator connection lines. The models MC, MCL and MCA are preassembled as a compact unit in a stainless steel rack. The control cabinet and the solenoid box are mounted on the rack. All internal electrical and pneumatic connections are installed. Each unit is tested before dispatch.
Controls
GEAIOis the new control panel generation for all GEA separator and decanter applications, focusing on intuitive handling, efficient processes and reliable operation.
Control functions
Logical navigation without redundant information enables user-friendly operation and safe monitoring of all centrifuge functions. GEAIOcan be operated as an individual controller or via optional bus communication.
Machine supervision
All required data are continuously monitored and evaluated in the background by the system. GEAIOprovides reliable information continuously (e.g. speed, temperature, vibration, etc.), enabling the plant operator to take action when required.
Monitoring and control of GEAstandomat
All functions required for reliable and accurate standardization such as density measurement, flow measurement, dosing, etc. are monitored and controlled precisily by GEAIO.
GEAIO-assistance
One innovation of the new GEAIOcontrol system is the user guidance facility. Assistance systems focusing on simplicity and usability are integrated or are optionally available.
Downloads
Related Products
Separators for Milk and Whey Skimming
GEA offers a comprehensive centrifuge portfolio for the skimming and standardization of milk and whey from various farm animals.
Automation & Controls Separation
Even the best centrifuges cannot function optimally if they are not partnered with control systems of equal quality. For their range of separators and decanters, GEA offers standardized as well as tailor-made solutions for machine automation with many features to meet customer requirements.
GEA Insights India
All pharmaceutical freeze-drying vials are the same! Aren't they?
Whether it’s a fad or the future, 100% vial traceability is becoming an increasingly important consideration in the pharmaceutical freeze drying industry. Keeping a close eye on developments is GEA. We’re investigating possible solutions and, what’s more, we have the experience, expertise and know-how to implement them.
Alcohol-free beer: They want it all – they want less
There was a time when the phrases ‘non-alcoholic beer’ and ‘tastes good’ were seldom used together in the same sentence, particularly by consumers. But low-proof and alcohol-free beers have come a long way – many of them now refreshing drinks in their own right – thanks in no small part to technology from GEA.
Innovating patient care with aseptic spray drying
At GEA, our commitment to engineering for a better world fuels our pursuit of innovative solutions that enhance patient care and safety. One of our most promising ventures in recent years is aseptic spray drying – a technology that promises to revolutionize pharmaceutical manufacturing.
